Technaxx marten repeller 4x AA or 12V (TX-368)

Ultrasonic repellent for martens and other small rodents with LED flash and three power supply options for use around cars, in shelters, garden sheds or attics.

Technaxx Marten Repellent TX-368 is a compact repellent using ultrasound at a frequency of 12–24 kHz in combination with an LED flash. It is designed to repel martens and other small rodents and, depending on the installation method, can be used around cars, in garages or shelters, garden sheds or attics.
The device offers several power supply options. It can operate with 4× AA batteries, via USB-C or be connected directly to a 12 V car battery using the supplied cable.
The repellent covers an area of up to 20 m2 in open spaces. During installation, the device should be positioned near the area where martens or other small rodents may enter the protected space. The ultrasonic speaker should not be covered and the LED light should face the entry point.
The design also includes a separate compartment for powdered repellent. However, the repellent is not included in the package.

• Repelling using ultrasound and LED flash
• Frequency range 12–24 kHz
• Coverage up to 20 m2 in open spaces
• Suitable for cars, shelters, garden sheds or attics
• 3 power supply options – 4× AA, USB-C or connection to a 12 V car battery
• Battery operating time approximately 45 days
• Automatic switch-off when the engine is running when connected to a vehicle
• Automatic reactivation 80 seconds after the engine is switched off
• Integrated compartment for powdered repellent (repellent not included)
• F1AL 250 V fuse
• Operating temperature from -10 to +60 °C
• Car battery connection cable, USB cable and cable ties included

ULTRASOUND AND LED FLASH
TX-368 combines an ultrasonic signal in the 12–24 kHz range with a flashing LED light. The coverage is up to 20 m2 in open spaces.
For correct operation, the ultrasonic speaker should not be covered and the LED should be directed towards the area where martens or small rodents may enter.

THREE POWER SUPPLY OPTIONS
One of the main advantages of the TX-368 is the ability to adapt the power supply to the place of use.
 - The device can operate on 4× AA 1.5 V batteries, which are not included in the package. With this power supply method, the specified operating time is approximately 45 days.
 - The second option is power via USB-C. For this operating mode, the manual specifies a 5 V / 1–2 A power adapter, which is not included in the package.
 - The third option is direct connection to a car battery up to 12 V DC using the supplied 0.6 m cable.

COMPARTMENT FOR POWDERED REPELLENT
There is a separate compartment for powdered repellent on the back of the device. The manual allows it to be filled with a suitable repellent and requires the compartment to be securely closed and kept in a dry environment. (Repellent is not included in the package)


TECHNICAL SPECIFICATIONS
Model: Technaxx Marten Repellent TX-368
PN: 5388
Repelling Method: Ultrasound + LED flash
Ultrasonic Frequency: 12–24 kHz
Coverage: Up to 20 m2 in open spaces
Power Supply: USB-C / 12 V DC / 4× AA
Batteries: 4× AA 1.5 V, not included
Battery Operating Time: Approx. 45 days
Car Battery Connection: Yes, cable included
Car Battery Cable Length: 0.6 m
USB Cable Length: 1 m
Fuse: F1AL 250 V
Operating Temperature: -10 to +60 °C
Powdered Repellent Compartment: Yes
Dimensions and Weight: 12.7 × 6.5 × 3 cm / 130 g
Package Dimensions and Weight: 12.5 × 3.6 × 17.5 cm / 154 g


PACKAGE CONTENTS

• Technaxx Marten Repellent TX-368
• Car battery connection cable
• USB cable
• 2× cable tie
• User manual

This product does not generate any data.